Before you buy a car door assist handle, it's worth knowing exactly what it attaches to. The good news is that it takes about ten seconds to check your car, and you don't need any tools.
What a car door assist handle hooks into
Every car door closes onto a small, sturdy metal loop bolted to the car's frame. Mechanics call it the door striker, but most people just call it the latch. It's usually a U-shaped (or upside-down U) piece of steel on the pillar beside the seat. Here's more on what the striker is.
Because the striker is part of the car's body, not the door, it doesn't move. That's why a handle that hooks into it gives you something solid to push down on, unlike the door itself, which swings.
The 10-second check
- Open the front door on the side you get out of.
- Look at the door frame beside the seat, roughly at the height of the seat cushion or a little higher.
- Find the U-shaped metal latch the door closes onto.
See one? Then a handle like SteadyStep will slide in. Most cars, SUVs, trucks and vans have this style of latch on the front doors, and many have it on the rear doors too.
When to double-check
- Unusual latch shapes. Some vehicles use a latch with a cover or a very different shape. If yours doesn't look like a simple U-shaped loop, check before you rely on a handle.
- Doors without a frame pillar, such as some convertibles or rear-hinged doors.
- Damaged or loose latches. If the striker is bent or loose, have it looked at first. The handle is only as solid as what it's hooked into.
Not sure? Take a quick photo of your door latch and send it to us. A real person will tell you whether it fits.
How to use it once it fits
- Open the door fully.
- Slide the metal hook straight down into the U-shaped latch so the handle sticks out level.
- Press down on the top of the grip with your palm and stand straight up.
- Lift the handle out and close the door. Never close the door with the handle still in the latch.
Will it damage the latch?
The striker is designed to hold the door shut in everyday driving, so it's very strong. A properly designed handle rests on it the same way the door's latch does. If you're worried about scratches, look for a handle with a smooth, well-finished hook, and always insert it straight rather than prying it in at an angle.
Quick answers
- Does it work on both sides of the car? Yes, if both doors have the U-shaped latch.
- Do I need a separate one for each car? No. It moves between cars in seconds, though many families keep one in each car so it's always there.
- Does it need installing? No tools and no installation. It slides in, you use it, it slides out.
- What about tall SUVs and trucks? They use the same latch. See our guide to getting into tall SUVs and trucks.