What Is a Car Door Striker? And Is It Safe to Lean On With an Assist Handle?

Hooking a car door assist handle down into the U-shaped door striker

If you've looked into car door assist handles, you've probably seen the word "striker". It's the part the handle hooks into, and understanding it explains why these handles work, and how to use one safely.

What the striker is

Open any car door and look at the door frame beside the seat. You'll see a small, sturdy metal loop or U-shaped bar bolted to the car's body. That's the striker. When you close the door, a claw-like latch inside the door wraps around it and holds the door shut.

Two things make the striker a good anchor point:

  • It's bolted to the car's frame, not the door. The door swings; the frame doesn't.
  • It's made of hardened metal because it takes the force of the door being slammed shut, over and over, for the life of the car.

How an assist handle uses it

A car door assist handle has a metal hook that drops down into the U of the striker. When you press down on the grip, the hook bears against the striker, so your weight goes into the car's frame. That's why it feels solid in a way the door, or a strap hanging from the window, doesn't.

A 30-second safety check

The handle is only as solid as the striker it's hooked into. Before you rely on it:

  1. Look at it. It should be a clean U or loop shape, not bent, cracked or heavily rusted.
  2. Wiggle it with your fingers. It shouldn't move at all. A loose striker usually also shows up as a door that's hard to close, rattles, or doesn't sit flush.
  3. Check the bolts are tight and the metal around them isn't damaged.

If anything looks loose or damaged, have a mechanic check it before using a handle. A worn or loose striker is a problem worth fixing anyway, because it can affect how securely the door closes.

Using a handle the right way

  • Only use it with the car parked, the engine off and the door fully open.
  • Slide the hook straight down into the striker until it seats. Don't pry it in at an angle.
  • Push down on the grip rather than pulling sideways.
  • Stay within the handle's weight rating. SteadyStep is rated to 400 lb.
  • Always take it out before closing the door.

Will it scratch the striker?

The striker is designed for metal-on-metal contact with the door latch, so normal use of a well-made handle won't harm how it works. Sliding the hook in straight, instead of scraping it in at an angle, keeps cosmetic marks to a minimum.

Want to confirm your car has the right kind of striker? See how to check in 10 seconds, or text us a photo and a real person will tell you.

Sources